-
Adhesion Formamidinium_lead_iodide PolyStylene Conduct Bismuth plastics lift_mode solar_cell Dimethicone HfO2 Electronics PtfeFilter Graphene Piezoelectric LiNbO3 H-BN Pore Pattern Hexatriacontane Nickel FrictionForce Annealing LightEmission HardDisk PatternedSapphireSubstrat Battery Oxide Cross-section Ptfe Grain Calcium Lift fluoroaalkane Gong FuelCell
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Single-crystal SrTiO3(001) after Annealing
Single-crystal SrTiO3(001) after 1h annealing at 1000°C in air. Formation of steps and terraces, and assembly at the nanoscale of SrO and TiO2 chemical terminations.
Scanning Conditions
- System: NX10
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256