-
Pore self-assembled_monolayer Oxidation Polyethylene mechanical property AAO LaAlO3 Aluminum dielectric_trench CancerCell Pattern WS2 Mosfet Piranha self_assembly molecules SoftSample cross section StrontiuTitanate BCZT Zagreb PVAP3HT NUS_NNI_Nanocore Collagen Molybdenum Defect OrganicCompound fifber Defects thermoplastic_elastomers HexacontaneFilm high_resolution WWafer CalciumHydroxide Ceramic
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Christmas Ball Lithography on Si
Create oxidation layers on bare Si surface using bias mode of lithography.
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area