-
Semiconductor Reading DiffractiveOpticalElements PrCurve BariumTitanate TemperatureControlledAFM Stiffness Polyurethane FM_KPFM Regensburg Molybdenum Implant Mechanical&nanotechnology Vinylpyridine Genetic Glass Polystyrene Fendb PolymerBlend AlkaneFilm TPU SmallScan Boron fe_nd_b SolarCell CopperFoil OpticalWaveguides Melt Aggregated_molecules Polydimethylsiloxane TemperatureControllerAFM flakes EvatecAG Electronics PFM
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Adhesive system
Scanning Conditions
- System: NX10
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256