-
tip_bias_mode DiffractiveOpticalElements TungstenThinFilmDeposition thermoplastic_elastomers multi_layer Ecoli BismuthFerrite Bacterium Piranha phase_change HardDiskMedia PinpointPFM Anneal ForceMapping GaN Epoxy Spain FrictionForce MagneticPhase polyvinyl acetate Cell Reading Battery Electical&Electronics AM_SKPM silicon_oxide NtuEee RedBloodCell Butterfly semifluorinated_alkane NUS Polytetrafluoroethylene Vacuum Conductivity Imprint
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
LiNbO3 wafer
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: AC55TS (k=85N/m, f=1600kHz)
- Scan Size:20μm×20μm, 2.5μm×2.5μm
- Scan Rate: 5Hz, 10Hz
- Pixel: 512×512, 256×256
- Scan Mode: Non-contact
- Cantilever: AC55TS (k=85N/m, f=1600kHz)
- Scan Size:20μm×20μm, 2.5μm×2.5μm
- Scan Rate: 5Hz, 10Hz
- Pixel: 512×512, 256×256