-
Mosfet Annealing Modulus MagneticArray InorganicCompound contact Polarization Inorganic layers Nickel VinylAlcohol bias_mode Sperm Floppy LMF BloodCell Chrome EFM neodymium_magnets Electrode Molybdenum Cross-section Pattern SFAs Yeditepe_University HACrystal MBE oxide_layer cooling Polytetrafluoroethylene biocompatible DNAProtein BFO Yttria_stabilized_Zirconia piezoelectric force microscopy
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm