-
Adhesion cross section Scratch MagneticForce Techcomp Tape silicon_oxide Lateral_Force_Microscopy PVA AnodizedAluminumOxide Ferrite Floppy thermal_property SSRM Semiconductor SiliconCrystal Solar Optoelectonics Patterns AmplitudeModulation Trench temp TappingMode Polyvinylidene_fluoride HiVacuum Optoelectronic Collagen ContactModeDots BoronNitride AM-KPFM nanobar FuelCell SurfaceOxidation PolyvinylideneFluoride hard_disk
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
SnS2 Flakes
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: AC240TS (k=2N/m, f=70kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 0.4Hz
- Pixel Size: 256 × 256
- Scan Mode: Non-contact
- Cantilever: AC240TS (k=2N/m, f=70kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 0.4Hz
- Pixel Size: 256 × 256