-
Patterns BoronNitride Hydroxyapatite Composite Regensburg VinylAlcohol light_emission Implant Sapphire SoftSample LiftMode FAFailureAnlaysis doped BiVO4 Indent pinpoint mode Etch Polypropylene cooling Zhi PiezoelectricForceMicroscopy BiFeO3 OrganicCompound Carbon UTEM YttriaStabilizedZirconia BCZT SingleCrystal Austenite STO Polyaniline University_of_Regensburg polyvinyl acetate HOPG temp
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm