-
Adhesion MfmPhase self-assembled_monolayer AM_KPFM Scanning_Thermal_Microscopy Liquid Boundary CopperFoil Spincast TipBiasMode PS_PVAC FM-KPFM MechanicalProperties Pinpoint PFM StyreneBeads CaMnO3 Perovskite EFM UnivMaryland Cobalt-dopedIronOxide Global_Comm Fluoride VinylAlcohol Electical&Electronics blended polymers DataStorage Sperm atomic_steps mono_layer NiFe Dental align mfm_amplitude Cobalt FAPbI3
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm