-
LFM NCM LowDensityPolyethylene Celebration Sic MfmAmplitude hard_disk FAFailureAnlaysis Etch C60H122 PhaseChange DataStorage NUS_NNI_Nanocore BiFeO3 Anneal light_emission HexacontaneFilm PetruPoni STM Chungnam_National_University Ptfe ContactModeDots SKKU atomic_steps cross section Workfunction Copolymer SrO Vanadate Pore NeodymiumMagnets HardDiskMedia Composition Fe_film Fiber
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co/Cr/Pt
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 1Hz
- Pixel: 512×512
- Lift height: 40nm