-
Electrical&Electronics NCM\ cannabis Pinpoint PFM FrictionalForceMicroscopy Aluminum DOE DLaTGS PolyimideFilm Ferroelectric ForceMapping Solution Cancer HydroGel PvdfBead LiftHeight Ferrite Sio2 Ucl UnivMaryland CaMnO3 Lanthanum_aluminate TungstenDeposition Sic Cross-section Phase tip_bias_mode molecular_beam Semiconductor ForceDistanceSpectroscopy MfmPhase SoftSample 2dMaterials TipBiasMode Ni-FeAlloy
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm