-
Ucl NanoLithography ThinFilm PolyvinylideneFluoride Permalloy BiFeO3 Ni-FeAlloy OpticalElement ScanningTunnelingMicroscopy small_scan FAPbI3 GaP SiliconOxide Optoelectonics Writing Defect F14H20 Spain LiftMode Organic HafniumDioxide CalciumHydroxyapatite polymeric_arrays CrossSection HexacontaneFilm Modulus Thermal Annealing fluoroalkane Imprint Hydroxyapatite CrAu Fujian ImideMonomer WS2
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm