-
Titanate MultiferroicMaterials StainlessSteel Polytetrafluoroethylene Regensburg GlassTemperature NTU OpticalWaveguides Polyethylene Au111 CeNSE_IISc fluoroalkane HanyangUniv Mechanical&nanotechnology Polyaniline Treatment Temasek_Lab Leakage thermal_conductivity fe_nd_b C36H74 Styrene MLCC LogAmplifier MolybdenumDisulfide 2dMaterials Magnetic Patterns ContactModeDots SoftSample SAM LowDensityPolyethylene Carbon cross section Friction
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ITO Film Sputter Deposited onto Silicon
ITO-film, which was sputter deposited onto silicon. The grain size of those samples was influenced by changing the process settings in the Cluterline RAD sputter deposition system, one of the deposition tool platforms manufactured by Evatec.
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: PPP-EFM (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 0.1Hz
- Pixel Size: 256 × 256
- Scan Mode: Non-contact
- Cantilever: PPP-EFM (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 0.1Hz
- Pixel Size: 256 × 256