-
Chloroform Graphene SAM SmalScan MoS2 Pyroelectric ThinFilm polymeric_arrays Sperm Regensburg Adhesion PhaseTransition StrontiuTitanate TemperatureControllerStage Croatia LaAlO3 Domain cooling SrTiO3 CrossSection FM_SKPM Foil Electical&Electronics OpticalWaveguide membrane atomic_steps Epoxy GaAs SicMosfet KPFM HumanHair Phosphide Inorganic dielectric trench LeakageCurrent
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Self-assembly of Semi-fluorinated Alkanes
Domains formed by the self-assembly of semi-fluorinated alkanes deposited as a monolayer on the surface of the water. The monolayer was compressed before being transferred onto a silicon substrate. Each domain includes about 4000 molecules. The domains were easily detached from the substrate with tapping mode because the molecules were very loosely attached to the substrate. Only Non-contact mode could achieve this result.
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: PPP-FMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm, 0.5μm×0.5μm, 0.2μm×0.2μm
- Scan Rate: 2Hz
- Pixel Size: 500 × 500
- Scan Mode: Non-contact
- Cantilever: PPP-FMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm, 0.5μm×0.5μm, 0.2μm×0.2μm
- Scan Rate: 2Hz
- Pixel Size: 500 × 500